Category: Tools & Techniques

The origins of tool names and everyday construction methods.

  • Why Do We Say Hammer

    Why Do We Say Hammer

    Historical illustration of mallets and hammers

    The first real tool I ever bought was a Stiletto framing hammer. It retains a prized place in my heart and nail bags. Maybe, though, I was just harkening back to the deepest, most ancestral roots we have as humans, and that is our extraordinary love of hitting things with hard objects. The hammer specifically is the oldest tool in existence, dating back 3.3 million years (which is longer than modern humans have even been around, meaning other human species also used hammers). The concept is pretty simple and yet totally effective: blunt force with a blunt object to percuss another object. 

    The English word hammer is from the Old Norse word, hamarr. Hamarr means “tool with a stone head”, so it once again reminds us that we are historically subject to our most basic instincts to pick up stones and use them to pound things. Even if English didn’t specifically pick up the word from Old Norse, we could have also brought it in from Old Saxon hamur, Dutch hamer, Old High German hamar, or German Hammer. Take your pick. 

    The most famous hammer, of course, is Thor’s hammer, Mjølnir. On a side note, mjøl, which means crushed or ground wheat (and is the origin of the word “mill” or “miller”) may also be connected to the Latin word malleus, which is the root of the word mallet. 

    So that’s why we say “hammer”.

    A fun language lesson that should be easy enough:

    One last thought is how we ourselves can get hammered, but a nail doesn’t get hammered. A nail gets nailed.

  • Why Do We Say Screw

    Why Do We Say Screw

    Vintage illustration of a pig

    Screw up, get screwed, screw someone over, screw the pooch, screw it. 

    Screw is such a delicious word because it’s both the verb and the noun, which we don’t always get the luxury of having in English: for example, we don’t hole our holes, we drill our holes; we don’t axe with our axe, we chop with our axe. But we do screw our screws. And screw and get screwed by a lot of other things too. 

    I had heard rumors about where this word comes from before, and I refused to believe it. It seemed too outrageous, too convenient. It also seemed strange that the French word for screw, which is vis, is totally unrelated to the word screw. Considering that, so far, the majority of our trades words come from a Gallo-Latin and Norman root, this added to my confusion. So before I tell you where the word screw comes from, let me say that I went down a lot of rabbit holes to put my doubts to rest, so in this one glorious instance, the rumors were true. 

    Pig dicks.

    That’s it. That’s where the word screw comes from. Pig. Dicks.

    Let’s see how we get there. 


    First of all, spoiler alert: this is not the only word we use in building that comes from female pig genitalia. I’ll leave you wondering what the other is. But in the case of screw, this comes from the Latin word scrofa, which essentially means…female pig parts. Now if you remember from your time on the farm, you’ll recall that male pig genitalia is corkscrewed, just like their freaky little tails, and therefore the assumption is that the receiving end of this bizarre wine-opener-penis would be shaped in the inverse. 

    Now to be fair, the ancient Romans and the romance languages that followed did NOT use scrofa to refer to a screw. Like the sweetly innocent people they are, they used the word vis, which comes from the Latin word for the twirly tendrils on grape vines (which look like pig penises) because of course the French would find a way to connect something to fine wine.

    No no, it was the Germans who took the word scrofa and ran with it. Considering the Germans usually have a word for everything, they probably were a little embarrassed that they didn’t have a specific word for pig vag and adopted the Latin word instead. From there, they made inferences, and to this day the German word for screw is Schraube. The joke caught on in the Germanic and Nordic languages, so they also adopted the word into their respective languages (skru in Norwegian, skruva in Swedish, skrúfa  in Icelandic) and in English, screw. 

    So, is this where we also get the connotation of “screw” as a sexual act? I can’t say for sure. I think humans will be humans and make sexual inferences from almost anything, and screwing a screw into wood is pretty low-hanging fruit. BUT–the word does make a huge difference. I don’t believe it’s as much of a double-entendre in French or Spanish, where the words aren’t connected to a sex act. 

    In conclusion, I hope when you use a corkscrew to open a bottle of wine, you will think of the etymological significance of both items–one being related to a pig prick, one being related to a grape vine–and appreciate that somehow they both ended up relating to the word for screw. 

    And that’s why we say screw. 


    Side note: this one took a lot of research just because it’s so insane. If you’d like to follow my tracks, I ended up deep in the German equivalent of the OED, the French wikipedia etymology page, and multiple Nordic-language sources: https://www.sprakradet.no/, http://no2014.uib.no/perl/ordbok/no2014.cgi, https://nordeniskolen.org/da/om-norden-i-skolen-siden/lydordbog/, http://no2014.uib.no/perl/ordbok/no2014.cgi


    Also, in case you weren’t fully convinced of my commitment to this issue, I also unfortunately looked up other animals that have corkscrew penises and the answer is ducks. Ew.

  • Why Do We Say Plumb

    Why Do We Say Plumb

    Diagram of a traditional plumb bob

    Plumb is from the Latin word plumbum, and honestly if you’re not calling every plumber you know a plumbum I think you’re missing a pretty good crack.

    Plumbum means lead. Its first construction usage was in the use of lead weights connected to a string to find a perfectly vertical line, thanks to gravity. We still use this tool, which is a plumb bob. The “bob” part is a weird addition, since it means an up-and-down motion, but I guess it’s possible to make the case for it if you’re spending a lot of time reeling it up and dropping it down again. If you’re catching on to any fishing words in here, it’s because maritime terminology also uses plumb to refer to gauging the depth of water (“plumbing the depths”) using an almost identical process to a carpenter finding plumb. Fishing also uses plumb bob weights, which, of course, are small lead sinkers.

    Egyptian plumb bob

    A plumber (plombier in French), then, is someone who works with lead—which, historically, is the material used for pipes. The name stuck, and now anyone who works with pipes is called a plumber (fun side note, in Norwegian a plumber is a rørlegge, literally a pipe-placer). Luckily, our enhanced-belt-cleavage friends don’t have to work with much lead anymore, which is both great for their health and for their bottom line.

    So that’s why we say plumb.

  • Why Do We Say Furring Out

    Why Do We Say Furring Out

    Historical fur trader with animal pelts

    I once was reading over a daily log in which the carpenter wrote that his solution to a problem was to “fir out the wall”. He’s a smart guy who doesn’t usually make spelling errors. It struck me that thinking of this particular task in terms of wood made perfect sense—aren’t you literally adding spruce-pine-fir to an existing structure? 

    Furring out (yeah, bruh, it’s “fur”) is the act of adding extra wood to a structure to give it additional depth. It’s usually a 1×2 or 2×2 attached to the face of each stud to help make a wall flat, or make walls meet correctly, or to make room for something like a wire or pipe. We do it all the time in remodeling. But where does that term come from?  

    Back in the “old days”, when winter arrived, people would take their clothing to the furrier to get furred out. This meant attaching fur strips to the inside of a garment to give it extra warmth and depth. You’d get your skirt furred out, your coat furred out. It comes from the French word fourrer*, which means to line or sheath something.

    Carpentry adopted the term because the action and result was essentially the same. While no one was literally nailing furs to the studs, the concept of adding thickness with extra padding was easily conveyed by using the same term for both carpentry and clothing. Overtime, the clothing industry switched from saying “furring out” to “lining”. Carpentry has expanded the term, however, and it’s not uncommon to hear “furring in” or “furring down”. 

    Strangely, carpentry does *also* have the phrase to “line out” but its origin bears no relationship to clothing.

    So that’s why we say “furring out.”

    *fourrer in modern French slang also mean to sheath…um…something else.